Search Results for: raw

1073.00 RAW

Komé RAW is a variant of the original Randi-Line® Komé lever handle, designed by C.F. Møller Architects. This ”raw”, sandblasted version of the lever handle fits perfectly in buildings with a rough or ”industrial” expression. Komé RAW in Stainless steel is available with a selection of sandblasted escutcheons, or it can be used in combination with the standard escutcheons and backplates from the Randi-Line® series.

  • Standard supplied in stainless steel (AISI 304). Supplied in pairs, for door thickness 40 mm, 34-58 mm or 58-82 mm, specify door thickness when ordering.
  • We recommend using a return spring when mounting this lever handle on a magnetic lock case or other lock cases, where the strength of the spring in the lock is inadequate.
  • Standard spindle 8×8 mm and 9×9 mm.
  • Tested and approved in accordance with the following standards:
    DS/EN 1906:2012
    DIN 18273-2015-07
Read more »

1100.00 RAW

Solid escutcheons in RAW sandblasted steel surface ø50×2 mm.

  • Available in sandblasted stainless steel (AISI 304)
  • With threaded bushes attached, fixing centres 30 mm, screws visible on one side.
  • Supplied in pairs including screws M4x84 mm.
  • Bathroom escutcheons: Standard for door thickness 34-50 mm.
  • Fits Scandinavian standard locks.
Read more »

1116.00 RAW

Solid escutcheons in RAW sandblasted steel surface ø50×2 mm.

  • Available in sandblasted stainless steel (AISI 304).
  • With threaded bushes attached, fixing centres 38 mm, screws visible on one side.
  • Supplied in pairs including Supplied in pairs including screws M4x84 mm.
  • Toiletbesætning standard for dørtykkelse 34-50 mm.
Read more »

1746-1748.00 RAW

Cranked Randi-Line® Komé window handle, ø14 mm solid. Designed by C.F. Møller Architects, fits door handles
no. RW1073

  • Supplied as standard in solid, raw stainless steel (AISI 304).
  • RW1746 – with attached rose, 22x65x3 mm.
  • RW1748 – with attached rose, 30x65x3 mm.
  • Drilled for M5 screws or wood screws, fixing centres 43 mm.
  • Supplied singly including M5 screws.
  • Window handles supplied standard with either 35, 43, 53 or 63 mm spindle length.
  • S = special spindle length up to 95 mm at extra cost.
  • The handle are available with either 7×7 mm or 8×8 mm spindle.
  • Curved window handles must be specified with either right=R or left=L
    Examples of part numbers:
    1746 with 7x7x35 mm pin: RW1746.01R-35
Read more »

1115.00 RAW

Solid escutcheons in RAW sandblasted steel surface ø50×2 mm.

  • Available in sandblasted stainless steel (AISI 304).
  • Drilled for wood screws, fixing centres 38 mm.
  • Supplied in pairs including wood screws 3,5×13 mm. Fits Scandinavian standard locks.
  • Toiletbesætning standard for dørtykkelse 34-50 mm.
Read more »

1115.80 RAW

Solid escutcheons in RAW sandblasted steel surface ø50×2 mm.

  • Available in sandblasted PVD brass.
  • Drilled for wood screws, fixing centres 38 mm.
  • Supplied in pairs including wood screws 3,5×13 mm. Fits Scandinavian standard locks.
  • Toiletbesætning standard for dørtykkelse 34-50 mm.
Read more »

1116.80 RAW

Solid escutcheons in RAW sandblasted steel surface ø50×2 mm.

  • Available in sandblasted PVD brass.
  • With threaded bushes attached, fixing centres 38 mm, screws visible on one side.
  • Supplied in pairs including Supplied in pairs including screws M4x84 mm.
  • Toiletbesætning standard for dørtykkelse 34-50 mm.
Read more »